How long does it take for the fog machine to be ready for use?

Depending on the model (e.g., Eliminator VF1600), it takes about 3–5 minutes. The integrated heating coil must reach its operating temperature.

Can smoke detectors be triggered by the fog machine?

Yes, fog particles are similar to smoke. Therefore, you should deactivate smoke detectors in rooms where they are not safety-critical or only use the machine in areas where smoke detectors are not required.

How powerful is the fog output?

That depends on the model. The VF1600 has a high output rate during full operation. It is best to test the settings before the event to find the desired volume.

Where can I rent a fog machine if I don't own one?

At Renty, you can easily rent fog machines online, along with other party equipment such as speakers, microphones, or DJ gear.

Instructions

Fog machine Video-Bedienungsanleitung

Instructions for the plug-and-play setup of our event equipment. Short video tutorials and step-by-step guides for... Show more making professional event technology so accessible and easy to understand that you can host a great event without any technical expertise.

This guide provides a step-by-step walkthrough on how to set up a fog machine like the Eliminator VF1600 EP, use the remote control effectively, and refill the fog fluid correctly. You can also watch our video tutorial:

1. Setting up the fog machine (00:00)

Preparation
Check that all parts (fog machine, remote, power cable) are present and that the fog machine is undamaged.
Power connection
Connect the machine to a grounded outlet to ensure a safe power supply.
Wait for the warm-up phase
After switching it on, an indicator LED will light up. Wait until the machine reaches its optimal operating temperature – this may take a few minutes.

Tip: Ensure the machine is on a stable, fireproof surface with enough space from the wall. This prevents overheating or damage.

2. Remote control explanation (00:38)

On/Off switch
Many fog machines can be turned on or off directly via the remote. Check the indicators (e.g., LED light) to see if the machine is ready.
Timer and interval functions
With our fog machine, you can use the remote to set the intervals at which fog is released. This is ideal for long parties, as it eliminates the need for constant manual adjustment.
Manual fog burst
Using the "Manual" button, you can trigger a burst of fog at any time, provided the heater is at operating temperature.

Tip: It is best to test the various buttons before the party to familiarize yourself with the remote control.

3. Refilling the fog fluid (01:32)

Refilling
Carefully open the tank cap. Fill the fog fluid up to the recommended maximum level. Be careful not to spill anything or pour anything into the device that doesn't belong there. Ensure the intake hose reaches the bottom of the tank so it can continue to draw fluid even when the level is low.
Maintenance & cleaning
Monitor the fluid level regularly. For long-term storage, it is worth emptying the tank and flushing the machine briefly with a special cleaning fluid.

Tip: Always keep a small supply of fog fluid on hand so you don't run out of fog in the middle of your event.

‍

Microphone FAQ